Historic American Buildings Survey/Historic American Engineering Record/Historic American Landscapes Survey: Search Results
1
|
|
|
76 results containing "Alabama--Chambers County--Valley"
Larger image available anywhere (76)
|
Larger image available only at the Library of Congress
|
Not Digitized
|
Surveys only (22)
-
1. General streetscape view in Langdale Mill Village - 16th St. looking northwest. Note duplication of side-gable, duplex house type. - Textile Industry in Valley, Alabama, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-165-1 | HAER AL-165-1 -
2. View of looking southwest of street in Langdale Mill Village with two side-gable houses and bridge (at left) - Textile Industry in Valley, Alabama, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-165-2 | HAER AL-165-2 -
3. View of 60th Place in Langdale Mill Village with Craftsman front-gable bungalows. - Textile Industry in Valley, Alabama, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-165-3 | HAER AL-165-3 -
4. View of Reservoir St. in Riverview Mill village with side-gable, duplex houses. - Textile Industry in Valley, Alabama, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-165-4 | HAER AL-165-4 -
5. Streetscape view, looking east, of 24th Ave. in Shawmut Mill Village. - Textile Industry in Valley, Alabama, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-165-5 | HAER AL-165-5 -
1. Perspective view of east and south elevations of Riverdale Cotton Mill. The spinning room is located on the third floor, carding room on second floor and machine/maintenance shop on first floor. South elevation of Georgia Power powerhouse adjacent to Riverdale Mill appears on right. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-1 | HAER AL-166-1 -
2. East end of south elevation of Riverdale Cotton Mill. Georgia Power powerhouse is again visible at far right. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-2 | HAER AL-166-2 -
3. West end of south elevation of Riverdale Cotton Mill. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-3 | HAER AL-166-3 -
4. Detail view of remnants of tail race and water drainage on south elevation of mill. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-4 | HAER AL-166-4 -
5. View of remaining rock ledge from construction of passage to enter mill (Riverdale Cotton Mill was built into the side of a hill). Partially subterranean area was popular with employees trying to escape the heat of the mill, now an unofficial smoking area. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-5 | HAER AL-166-5 -
6. View from north looking at power plant (center back), north elevation of mill (right back), old boiler room (center) with remnant of stack at right front corner of roof, and warehouses (left). - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-6 | HAER AL-166-6 -
7. Detail view of 1866 cornerstone (J.J. Havis and M.F. Echols, Builders). This cornerstone was moved to the third floor, west elevation of an addition built in 1899. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-7 | HAER AL-166-7 -
8. Detail view of roof truss on third floor of 1866 section of mill. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-8 | HAER AL-166-8 -
9. Detail view of typical wooden column and beam connection, located in second floor carding room of 1866 section of mill. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-9 | HAER AL-166-9 -
10. View of Draper darby chain loom from warp beam end, patent date 1913, made by Drpaer Corporation, Hopedale, Massachusetts. Acquired ca. 1941. Note Draper-Northrop name on automatic spindle changer. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-10 | HAER AL-166-10 -
11. Detail of stone buttressed over tailrace, view from interior of first floor. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-11 | HAER AL-166-11 -
12. Stone buttresses on north side of mill, view from interior of turbine room at basement level. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-12 | HAER AL-166-12 -
13. Detail view of turbine chamber and turbines, located below mill in old turbine room. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-13 | HAER AL-166-13 -
View looking northwest of warehouses for Riverdale Cotton Mill. Note mill pond formed by Riverview dam at right - Riverdale Cotton Mill, Warehouses, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-A-1 | HAER AL-166-A-1 -
Old Riverdale Cotton Mill office building on left. The old office building has also been used as a starch mixing house. Note entrance to new office building on right - Riverdale Cotton Mill, Office Building, Old, Valley, Chambers County, AL
1997 | 5 x 7 in. | Lowe, Jet
HAER AL-166-B-1 | HAER AL-166-B-1
